G0 Superconducting Magnet System
Drawings from UIUC

Links on this page will allow you to view or download drawings created at UIUC (or by UIUC consultants) and associated with the G0 Superconducting Magnet System. Drawings have been stored in a number of formats. Drawing files (.dxf and .dwg) are compatible with Autocad Release 12, 13, 14, or 2000. .dxf files may (or may not) be compatible with other CAD programs. For compatability with older systems, where the original drawing files were provided in Autocad release 13, 14, or 2000 format, .dwg and .dxf files are also provided in release 12 format. Note that the conversion to release 12 may have resulted in some loss of information. When in doubt, use the dwg files in the most recent release.

In many cases, groups of drawings have been archived as a single file with the Unix utility tar. Those tar archives have been compressed with Gnu zip. Your browser may automatically unzip the Gnu-zipped files and then try to display them on your terminal. While this may work for some formats for which you have installed helper programs, others may be displayed as (unreadable) text. In that case, try downloading the file using FTP from the anonymous FTP site ftp://ftp.npl.uiuc.edu/pub/G0/drawings/sms/uiuc (see README and directories in pub/G0/drawings/sms/uiuc).

• Drawing lists
  
  
  • A database of drawings created by L. Bartoszek. Note that file names end in the revision letter (if any). The exception to this are files which end in s (solid model) or o which indicates "drawn to cold dimensions" (the assumption here is that we will never reach revision o :-) - L. Bartoszek, December 3, 1998
    (Gnu-zipped postscript, 5.7 kb)
    (Excel binary, 45.5 kb)
    
    
  • A database of drawings updated from L. Bartoszek's list -S. Williamson, March 29, 2000
    (Gnu-zipped postscript, 14.5 kb)
    (Excel binary, 82.4 kb)
    
  
  
• The G0 Master Assembly Drawing (Obsolete).
  Note that dimensions and configurations in this drawing may be out of date. This drawing should be taken only as a "sketch" of the hardware. True dimensions may be found by examining up to date drawings or by contacting the appropriate subsystem manager.
  • Additional information concerning the master assembly drawing (text)
  • G0 Master - version 8 (Gnu-zipped Autocad Rel. 12 .dwg)
  • G0 Master - version 8 (Gnu-zipped Autocad Rel. 12 .dxf)
  
  
• The G0 Superconducting Magnet System (SMS) Assembly Drawing (Obsolete).
  Note that dimensions and configurations in this drawing may be out of date. This drawing should be taken only as a "sketch" of the hardware. True dimensions may be found by examining up to date drawings or by contacting the appropriate subsystem manager.
  • Additional information concerning the SMS assembly drawing (text)
  • G0 SMS - version 1 (Gnu-zipped Autocad Rel. 12 .dwg)
  • G0 SMS - version 1 (Gnu-zipped Autocad Rel. 12 .dxf)
  
  
• Archives of the G0 Spectrometer Specification Drawings (updated for ECP 0008).
  
  • Drawing numbers and titles of the specification drawings (text)
  • ALL specification drawings (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • ALL specification drawings (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • ONLY those specification drawings for which original is in Autocad rel. 13 format (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • ONLY those specification drawings for which original is in Autocad rel. 14 format (tared, then Gnu-zipped Autocad Rel. 14 .dwg)
  • Postscript plots of specification drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of the Support (carriage) Manufacturing Drawings.
  • Drawing numbers and titles of the support drawings (text)
  • Carriage drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Carriage drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of carriage drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of the Collimator Module Manufacturing Drawings.
  
  • Full assembly drawings
    • Drawing numbers and titles of the full assembly drawings (text)
    • Full assembly drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Full assembly drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Full assembly drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the full assembly drawings (tared, then Gnu-zipped postscript)
  • Aluminium plates
    • Drawing numbers and titles of the aluminium plate drawings (text)
    • Aluminium plate drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Aluminium plate drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Aluminium plate drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the aluminium plate drawings (tared, then Gnu-zipped postscript)
  • Cooling straps
    • Drawing numbers and titles of the cooling strap drawings (text)
    • Cooling strap drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Cooling strap drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Cooling strap drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the cooling strap drawings (tared, then Gnu-zipped postscript)
  • Threaded and cast-in inserts
    • Drawing numbers and titles of the threaded and cast-in insert drawings (text)
    • Threaded and cast-in insert drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Threaded and cast-in insert drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Threaded and cast-in insert drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the threaded and cast-in insert drawings (tared, then Gnu-zipped postscript)
  • Assembly keys
    • Drawing numbers and titles of the assembly key drawings (text)
    • Assembly key drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Assembly key drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Assembly key drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the assembly key drawings (tared, then Gnu-zipped postscript)
  • Cast lead pieces
    • Drawing numbers and titles of the cast lead drawings (text)
    • Cast lead drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Cast lead drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Cast lead drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the cast lead drawings (tared, then Gnu-zipped postscript)
  • Parts modifications
    • Drawing numbers and titles of the parts modification drawings (text)
    • Parts modification drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Parts modification drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Parts modification drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the parts modification drawings (tared, then Gnu-zipped postscript)
  • Octagon stringer - top hat
    • Drawing numbers and titles of the octagon-stringer - top hat - drawings (text)
    • Octagon-stringer - top hat - drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Octagon-stringer - top hat - drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Octagon-stringer - top hat - drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the octagon-stringer - top hat - drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings for G0 collimator tooling.
  
  • Azimuthal collimator gages
    • Drawing numbers and titles of the azimuthal collimator gage drawings (text)
    • Azimuthal collimator gage drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Azimuthal collimator gage drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Azimuthal collimator gage drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the azimuthal collimator gage drawings (tared, then Gnu-zipped postscript)
  • LOS-LP collimator drilling template
    • Drawing numbers and titles of the LOS-LP collimator drilling template drawings (text)
    • LOS-LP collimator drilling template drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • LOS-LP collimator drilling template drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • LOS-LP collimator drilling template drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the LOS-LP collimator drilling template drawings (tared, then Gnu-zipped postscript)
  • Collimator assembly/fabrication pick-points
    • Drawing numbers and titles of the collimator assembly/fabrication pick-point drawings (text)
    • Collimator assembly/fabrication pick-point drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Collimator assembly/fabrication pick-point drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Collimator assembly/fabrication pick-point drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the collimator assembly/fabrication pick-point drawings (tared, then Gnu-zipped postscript)
  • Collimator spreader assembly tool
    • Drawing numbers and titles of the collimator spreader assembly tool drawings (text)
    • Collimator spreader assembly tool drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Collimator spreader assembly tool drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Collimator spreader assembly tool drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the collimator spreader assembly tool drawings (tared, then Gnu-zipped postscript)
  • Assembly/shipping fixture - toaster
    • Drawing numbers and titles of the assembly/shipping fixture - toaster - drawings (text)
    • Assembly/shipping fixture - toaster - drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
    • Assembly/shipping fixture - toaster - drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
    • Assembly/shipping fixture - toaster - drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
    • Postscript plots of the assembly/shipping fixture - toaster - drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of G0 SMS prototype and test devices.
  • Titles of the prototype and test device drawings (text)
  • Prototype and test device drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • Prototype and test device drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Prototype and test device drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the prototype and test device drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of G0 SMS "window box" and "target stalk" optical verification hardware.
  • Titles of the optical verification hardware drawings (text)
  • ONLY those optical verification hardware drawings for which original is in Autocad rel. 13 format(tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • ONLY those optical verification hardware drawings for which original is in Autocad rel. 14 format(tared, then Gnu-zipped Autocad Rel. 14 .dwg)
  • Optical verification hardware drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Optical verification hardware drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the optical verification hardware drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of G0 SMS optical verification hardware.
  • Titles of the optical verification hardware drawings (text)
  • Optical verification hardware drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • Optical verification hardware drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Optical verification hardware drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the optical verification hardware drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of miscellaneous test fixtures for the G0 SMS.
  • Titles of the miscellaneous test fixture drawings (text)
  • Miscellaneous test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • Miscellaneous test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Miscellaneous test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the miscellaneous test fixture drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of the window test fixture for the G0 SMS.
  • Titles of the window test fixture drawings (text)
  • Window test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • Window test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Window test fixture drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the window test fixture drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of the downstream head exit window and associated test fixtures. (Updated for 2925-2a and 2925-3a.)
  • Titles of the exit window drawings (text)
  • Exit window drawing archive (tared, then Gnu-zipped Autocad Rel. 14 .dwg)
  • Exit window drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Exit window drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the exit window drawings (tared, then Gnu-zipped postscript)
  
  
• Schematic of the LN2 plumbing - A. Kenyon, October 6, 1999
  • (Gnu-zipped Autocad Rel. 13 .dwg, 15.0 kb)
  • (Gnu-zipped Autocad Rel. 12 .dwg, 10.0 kb)
  • (Gnu-zipped Autocad Rel. 12 .dxf, 10.0 kb)
  • (Gnu-zipped B&W Postscript, 21.0 kb)
  
  
• Modifications to South Fence at NPL (plan A) - A. Kenyon, September 21, 1999
  • (Gnu-zipped Autocad Rel. 13 .dwg, 22.4 kb)
  • (Gnu-zipped Autocad Rel. 12 .dwg, 14.2 kb)
  • (Gnu-zipped Autocad Rel. 12 .dxf, 15.7 kb)
  • (Gnu-zipped B&W Postscript, 32.7 kb)
  
  
• Modifications to South Fence at NPL (plan B) - A. Kenyon, September 21, 1999
  • (Gnu-zipped Autocad Rel. 13 .dwg, 17.3 kb)
  • (Gnu-zipped Autocad Rel. 12 .dwg, 11.4 kb)
  • (Gnu-zipped Autocad Rel. 12 .dxf, 12.5 kb)
  • (Gnu-zipped B&W Postscript, 26.2 kb)
  
  
• The G0 3-D Model - L. Bartoszek, November 11, 1999
  Note: it is possible that some parts in this drawing are not up-to-date.
  • (Gnu-zipped Autocad Rel. 13 .dwg, 2.87 Mb)
  
  
• The UIUC helium delivery connection of the UIUC helium liquifier. - A. Kenyon, December 20, 1999 (updated June 29, 2000)
  • Drawing numbers and titles of the drawings of the UIUC He liquifier connection (text)
  • Drawings of the UIUC He liquifier connection (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Drawings of the UIUC He liquifier connection (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Drawings of the UIUC He liquifier connection (tared, then Gnu-zipped Autocad 2000 .dwg)
  • Postscript plots of drawings of the UIUC He liquifier connection (tared, then Gnu-zipped postscript)
  
  
• Drawings of the flexible U-Tube (LHe transfer line) to be used in Hall C and at NPL - P. Brindza, January 7, 2000
  • Assembly drawing of the transfer line (JLab drawing 67144-E-56223)
    (Scanned gnu-zipped postscript, 76.1 kb)
    (Scanned TIF pixel image, 74.2 kb)
  • Layout of transfer line at UIUC NPL
    (Scanned gnu-zipped postscript, 58.3 kb)
    (Scanned TIF pixel image, 49.3 kb)
  
  
• Drawing of the SMS beam-line flange (aluminum) (G0-BW-3056) - BWXT, December 14, 1999
  (Scanned gnu-zipped postscript, 86.7 kb)
  (Scanned GIF pixel image, 104 kb)
  
  
• Drawings of the optical verification window port (window box) lifting fixture (a.k.a. "the claw") - A. Kenyon, January 10, 1999
  (JPEG pixel image, view 1, 129 kb)
  (JPEG pixel image, view 2, 109 kb)
  
  
• Archives of drawings of G0 SMS optical verification target insertion tool.
  • Titles of the target insertion tool drawings (text)
  • ONLY those target insertion tool drawings for which original is in Autocad rel. 13 format(tared, then Gnu-zipped Autocad Rel. 13 .dwg)
  • ONLY those target insertion tool drawings for which original is in Autocad rel. 14 format(tared, then Gnu-zipped Autocad Rel. 14 .dwg)
  • Target insertion tool drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Target insertion tool drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the target insertion tool drawings (tared, then Gnu-zipped postscript)
  
  
• Archives of drawings of new and modified hardware testing the UIUC helium liquefier with a dewar and heat load. - A. Kenyon, June 29, 2000
  • Titles of the dewar test drawings (text)
  • Dewar test drawing archive (tared, then Gnu-zipped Autocad 2000 .dwg)
  • Dewar test drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dwg)
  • Dewar test drawing archive (tared, then Gnu-zipped Autocad Rel. 12 .dxf)
  • Postscript plots of the dewar test drawings (tared, then Gnu-zipped postscript)
  
  
• Drawings of the layout of cryogenic plumbing and the liquifier at UIUC.
  • 1400 Liquefier Schematic, Simplified Version - A. Kenyon, March 22, 2000
    • (Gnu-zipped Autocad 2000 .dwg, 32 kb)
    • (Gnu-zipped Autocad Rel. 12 .dwg, 22 kb)
    • (Gnu-zipped Autocad Rel. 12 .dxf, 25 kb)
    • (Gnu-zipped B&W Postscript, 44 kb)
  • Piping Schematic, Overall NPL Liquifier System (rev. D) - A. Kenyon, May 6, 2001
    • (Gnu-zipped Autocad 2000 .dwg, 109 kb)
    • (Gnu-zipped Autocad 2000 .dxf, 106 kb)
    • (Gnu-zipped Autocad Rel. 12 .dwg, 85.9 kb)
    • (Gnu-zipped Autocad Rel. 12 .dxf, 94.2 kb)
    • (Gnu-zipped color Postscript, 57.2 kb)
    • (Portable Document Format, 62.9 kb)
  
  
• Drawings provided by Ability Engineering which show the modifications to be made to the original JLab design for the flexible LHe transfer line to adapt it to the UIUC liquifier. Note that these drawings do not include an external reference containing the bill of materials. (Obsolete) - Ability Engineering, May 15, 2000
  • Female N2 Bayonet Adaptor
    • (Gnu-zipped Autocad 2000 .dwg, 126 kb)
    • (Gnu-zipped Autocad Rel. 12 .dwg, 93 kb)
    • (Gnu-zipped Autocad Rel. 12 .dxf, 110 kb)
    • (Gnu-zipped B&W Postscript, 15.2 kb)
  • Retrofit lines 1 and 2
    • (Gnu-zipped Autocad 2000 .dwg, 152 kb)
    • (Gnu-zipped Autocad Rel. 12 .dwg, 115 kb)
    • (Gnu-zipped Autocad Rel. 12 .dxf, 137 kb)
    • (Gnu-zipped B&W Postscript, 27.7 kb)
  
  
• A rendering of the 3-part shielding concept (flange collar - yellow , L block - orange, window frame cover - red). (Obsolete). - S. Williamson, June 11, 2000
  (GIF pixel image, 30.6 kb)
  
  
• Archives of drawings of the G0 Magnetic Verification Laser Alignment System.

  • Pictures (3-d rendered images) of the final design of fixtures for magnetic verification alignment - Bartoszek Engineering, June 23, 2000

  • A 3-D model of the magnetic verification alignment hardware. There are actually several model files because the cryostat, probe, and carriage have been "XREFed" into the main assembly called magver_assy2.dwg. To view the model: load all four drawing files into the same directory (doesn't matter what you call it) and open the main assembly (magver_assy2.dwg). - L Bartoszek and R. Luther, June 22, 2000
    (tared, then gnu-zipped Autocad Rel. 14 .dwg, 2.21 Mb)
  • Laser alignment system manufacturing drawings - L Bartoszek, September 3, 2000
    • (ASCII text file of titles, 883 b)
    • (tared, then gnu-zipped Autocad Rel. 14 .dwg, 1.37 Mb)
    • (tared, then gnu-zipped Autocad Rel. 12 .dwg, 1.33 Mb)
    • (tared, then gnu-zipped Autocad Rel. 12 .dxf, 1.42 Mb)
    • (tared, then gnu-zipped postscript, 844 kb)
  
  
• A view of the concept for the optical verification Invar rod clamp - L. Bartoszek, July 25, 2000
  (click for an enlargment, 148 kb)
  
  
• A 3-D draft of the barn layout with various items on the floor and walls. - A. Kenyon, August 28, 2000
  
  
• A 3-D model of the SMS Cryostat
  This model is built entirely using Autocad 3D solids (no mechanical desk top entities). It does not include the current design for the aluminum heads. Note: it is possible that some parts in this drawing are not up-to-date.
  • (Gnu-zipped Autocad Rel. 14 .dwg, 899 kb)
  
  
• An archive of files which together make a 3-d model of the transition box region.
  The main drawing, which "x-refs" the others, is called 01transbox.dwg. - A. Kenyon, January 25, 2002
  • (Gnu-zipped tar archive of Autocad 2000 .dwg files, 314 kb)
  
  
• A draft drawing of the MLI blankets used to insulate the US and DS end-caps. - A. Kenyon, January 29, 2002
  • (Gnu-zipped Autocad Rel. 14 .dxf, 17.8 kb)
  • (Gnu-zipped Autocad 2000 .dwg, 22.3 kb)
  • (Portable Document Format, 26.9 kb)
  
  
• Archives of drawings of the G0 Magnet External Shielding.

  • Pictures (3-d rendered images) of the external lead (concepts, final design, and fixtures) - Bartoszek Engineering, April-June 2002

  • Manufacturing drawings of aluminum parts for the external shielding - Bartoszek Engineering, May 14, 2002
    
    • (tared, then Gnu-zipped Autocad 2000 .dwg, 276 kb)
  • Manufacturing drawings of borated polyethylene external shielding - Bartoszek Engineering, May 13, 2002
    
    • (tared, then Gnu-zipped Autocad Rel 14 .dwg, 280 kb)
      (tared, then Gnu-zipped Autocad 2000 .dwg, 299 kb)
  • Manufacturing drawings of the lifting fixture for the external shielding - Bartoszek Engineering, April 14, 2002
    
    • (tared, then Gnu-zipped Autocad 2000 .dwg, 736 kb)
  • Manufacturing drawings of the drilling template for producing mounting holes for the external shielding - Bartoszek Engineering, April 7, 2002
    
    • (tared, then Gnu-zipped Autocad 2000 .dwg, 455 kb)
  • STEP file of the solid model assembly of the lead shielding. Two different versions of STEP for the same solid model are provided: one in STEP 203, the other STEP 214. Also provided are log files (.xlo files) of the conversion to STEP format. - Bartoszek Engineering, June 3, 2002
    
    • (tared, then Gnu-zipped STEP files, 2.10 Mb)
  
  
• Archives of drawings shipping fixture used to transport the G0 magnet to JLab in February, 2002.
  • Manufacturing drawings of shipping fixture parts - Bartoszek Engineering, March 15, 2002
    
    • (tared, then Gnu-zipped Autocad 2000 .dwg, 18.1 Mb)
  
  
  
• Archives of drawings of the G0 SMS turn-around brackets.

  • Pictures (3-d rendered images) of the SMS turn-around brackets - Bartoszek Engineering, June 18, 2004

  • Manufacturing drawings of the SMS turn-around brackets- Bartoszek Engineering, July 5, 2004
    
    • (tared, then Gnu-zipped Mechanical Desktop 2004 .dwg, 753 kb)
    • (tared, then gnu-zipped Portable Document Format, 358 kb)
  
  
• Archives of drawings of the G0 back-angle lead insert
  • Final Version of Lead Insert for G0 (notes and renderings) - Bartoszek Engineering, May 21, 2005
    (Gnu-zipped MS PowerPoint, 366 kb)
    (Portable Document Format, 212 kB)
  • Manufacturing drawings of the G0 back-angle lead insert- Bartoszek Engineering, May 27, 2005
    (ASCII text file of titles, 470 b)
    (tared, then Gnu-zipped Mechanical Desktop .dwg, 2.09 Mb)
    (tared, then gnu-zipped Portable Document Format, 1.75 Mb)